communications modules & subsystems key features ? reach extension for power- and dispersion-limited oc-192/stm-64 links 3r operation with jitter rejection high transmit power (+2 dbm) excellent receiver sensitivity (-24 dbm minimum) extended dispersion tolerance to 80 km at oc-192 convection cooled; no fans required the waveshifter 600 er is a rugged optical regenerator that extends the reach of sonet oc-192 or 10-gigabit ethernet wide-area network (wan) data by up to 80 km on standard single-mode fiber (smf). a versatile reach-extender, the waveshifter 600 er can be used as an in-line regenerator for power, dispersion, or jitter-limited transmission applications. with its high-sensitivity receiver, incoming 10 gb/s signals are reshaped, retimed, and regenerated (3r), and retransmitted at high output power. the waveshifter 600 er converts any 1310 nm or 1550 nm optical input to a long- reach 1550 nm c-band output compatible with erbium doped fiber amplifiers (edfa) such as the lightamp and brightamp series of network-ready optical amplifiers. the waveshifter 600 er is also compatible with dual 1310/1550 and ruggedized wavelength division multiplexing (wdm) products, enabling wavelength overlays with 1310 nm intermediate and long-reach equipment. the waveshifter 600 er is ready to deploy out of the box into any waveready? 3500 shelf and can be provisioned in minutes for a wide range of network applications. applications sonet reach extension of loss and dispersion-limited links 1310/1550 wdm overlay with existing 1310 nm transmission equipment compliance telcordia nebs level 3 gr-253-core, issue 3, sections 4.1 (physical layer classifications), 5.6.1 (jitter for regenerators), and 7 (other generic criteria) ul 60950 third edition can/csa c22.2 no. 60950 00 third edition fcc class a unidirectional oc-192 optical regenerator waveshifter 600 er north america : 800 498-jdsu (5378) website : www.jdsu.com worldwide : +800 5378-jdsu
2 waveshifter 600 er specifications parameter 1 minimum typical maximum optical characteristics input and output data rate 9.95 gb/s (oc-192/stm-64, 10ge wan) input and output wavelength input wavelength, port a 1280 nm - 1600 nm output wavelength, port b 1530 nm - 1560 nm input sensitivity at 9.95 gb/s, ber=10 -12 -24 dbm - - input overload power at ber=10 -12 - - -6 dbm wavelength/temperature accuracy -200 pm - +200 pm maximum dispersion @ 1550 nm 2 db path penalty - - 1600 ps/nm dispersion penalty (80 km at oc-192 and ber=10 -12 )--2.0 db differential group delay (dgdmax) @ 1 db path penalty - - 30 ps extinction ratio 9.5 db - - eye mask per gr-253-core output power level +2 dbm - +6 dbm jitter (generation, tolerance, transfer) meets gr-253/itu-t g.98 and ansi x3.230-1994 electrical characteristics dc supply voltage - -48 v - power dissipation - 10.5 w 12 w alarm relay signals dry contact major and minor alarms, relay open under normal operation. relay closed when power is off. major (maj), minor (min) physical dimensions size (h x w x l) 6 x 2.2 x 8.5 inch (15.24 x 5.58 x 21.59 cm) weight (approximate) 5.0 lbs (2.27 kg) environmental characteristics operating ambient temperature -5 c - 55 c storage temperature -40 c - 85 c relative humidity (non-condensing) 5 % - 95% interface characteristics optical connectors sc/pc on input port a and output port b front panel four leds: card (power), maj (major alarm), min (minor alarm), los a (loss of input signal) note: this product should be deployed in accordance with your company?s deployment directives. 1. all specifications are guaranteed over the life, operati ng temperatures, wavelength range, and input voltage specified.
waveshifter 600 er north america : 800 498-jdsu (5378) website : www.jdsu.com worldwide : +800 5378-jdsu telcordia is a registered trademark of telcordia technologies incorporated. all statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. however, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. the user assumes all risks and liability whatsoever in connection with the use of a product or its application. jdsu reserves the right to change at any time without notice the design, specificat ions, function, fit or form of its products described herein, i nclud- ing withdrawal at any time of a product offered for sale herein. jdsu makes no representations that the products herein are free from any intellectual property claims of others . please contact jdsu for more information. jdsu and the jdsu logo are trademarks of jds uniphase corporation. other trademarks ar e the property of their respective holders. ?2006 jds uniphase corporation. all rights reserved. 10143134 rev. 001 03/06 wsh600er.ds.cms.ae ordering information for more information on this or other products and their availability, please contact your local jdsu account manager or jdsu directly at 1-800-498-jdsu (5378) in north america and +800-5378-jdsu worldwide or via e-mail at customer.service@jdsu.com. sample: WSH-600DC95SA product code clei description w s h-600dc95 s awm r 6t5cdaa wav es hif te r 600 e r associated part product code clei description 10129126 wmmnff0d r ad e ns e moun t s h e lf
|
